Tools

Aviation Snips

  • Description:
    • Makes tight left cuts thru hardened materials
    • Hot drop forged blades remain sharp
    • Special purpose is cutting hard metals such as stainless steel
    • Made in the USA

    Special Hardness snips are designed to cut through hardened materials such as Stainless steel, Inconel, and Titanium with ease. Offset aviation snips cut Pinch-Thru-point, requiring fewer rebites and accurate trim cuts. Offset blades channel sharp material edges away from users hand allowing for easier long cuts. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Makes left cuts thru thick hardened material. Both Bottom & top blades are serrated in order to grip material. Kush’n-Power grips comfort the users hands and reduce fatigue.

Drivers

Driver Options

  • Square Driver
  • Nut Driver Sizes:
    • 1/4″
    • 5/16″

Edge Roller

Hemming Tool

Lengths Available:

  • 15″
  • 17″
  • 24″

Hole Punch

Adjustable depth from edge of work.

Interchangeable punch and dies included

  • 1/8″ (3.3 mm)
  • 3/16″ (4.9 mm)

Does the work of more expensive, bulkier punches faster and easier! Use the Malco HP18KR for making holes along the edge of sheet metal and vinyl plastic including rivet or screw fastener holes in metal ductwork and vinyl window extrusions, or hog ring holes for attaching signs or bumpers to chain link fences or equipment cages. The tool is supplied with a 1/8 inch (3.2 mm) punch and die, pre-installed on the tool, as well as a 3/16 inch (4.8 mm) punch and die assembly. Punch and die assemblies are also available separately, including 3.6, 4.1 and 6.3 mm punch and die assemblies. The tool steel punches and dies can be changed or replaced on the job. A stop gauge permits tool throat depth adjustments from 1/4 to 1-1/8 inches (6.4 to 28.6 mm) for easy hole placement. The tool body consists of a lightweight, die cast aluminum “C” frame head and hardened steel handles and parts stampings with a rust-resistant, nickel plating to ensure long service life.

The Malco HP18KR Hole Punch also features ergonomic RedLine Handle technology. An Engineered handle opening compliments the natural power stroke of any user’s hand and maximizes the powerful 8:1 mechanical advantage of compound-leverage head to handle linkage. Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job.

Offset Hand Seamer

Offset seamer provides additional leverage when compared to straight models.

Blades are 3″ long by 1-1/4″ wide with a throat depth of 1-7/16″.

Blades are forged.

Kush’n-power grips comfort users hands and reduce fatigue.

Turbo Shear

  • Replaceable blades
  • Turns your power drill into a heavy duty power shear
  • Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
  • Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
  • Navigates tight patterns and square cuts
  • Clamping device is included

Replacement Blade For Shears

  • Replace the blades rather than the entire TurboShear
  • Cuts approximately 2000 linear feet per set of blades
  • Instructions included